Punching : DTP 340 M

Reliable, heavy-duty, desktop punching machine. The modular design makes it very versatile for all types of book and calendar production up to 340 mm in width.
more..

Punching : DTP 340 A

Fast and reliable, heavy-duty, semi-automatic, desktop punching machine. Very versatile machine for all types of book and calendar punching production up to 340 mm in width.
more..

Punching : Punching dies DTP 340 A


more..

Punching : Punching dies DTP 340 M


more..

[10.12.2009] RENZ® attended Paperworld in Frankfurt

On the booth the new RENZ DSP 360 was in the main focus. It is an automatic punching machine in modular principle for punching widths up to 360 mm.  The core of the system, the electrical punching unit, is expandable by an automatic feeder and an automatic ejection with paper tray.
When punching with the automatic feeder you can optionally switch on manual feeding if a very special and sensitive paper should require this. A novelty is the automatic jogging of the paper before punching: in the past you run the risk of unclear punching when you didn’t fed the paper accurately. Today with the RENZ DSP 360 this may not happen: the paper is automatically centred. This product closes the gap between the desktop solution RENZ DTP 340 A and the fully automatic heavy duty system RENZ Autopunch 360. Allows smaller digital service providers the ability to punch automatically.

In addition, the design of already known RENZ combi comfort, an electric punching and manual binding machine for plastic combs has had a face lift to fit with the new generation office products RENZ RING WIRE® machines and pouch laminators. These machines were also exhibited at Paperworld.
RENZ® showed further products from the Office Line and Semi-Professional Line: prospects found at the RENZ booth mainly solutions for binding with RENZ RING WIRE®.  But also products for spiral and plastic comb binding and for pouch laminating were exhibited.
more..

[26.05.2010] IPEX 2010 exceeds Renz expectations!

IPEX 2010 exceeds Renz expectations hitting £1m in punching and binding system sales

Leading punching and loose leaf binding manufacturer Renz, has said its post IPEX 2010 sales are set to approach £1 million after its highly successful launch of two new binding systems at this years exhibition.

The new Renz machines creating this buzz at IPEX were:
The revolutionary Autopunch 360-120 Block to Block - A floor-standing high speed punching machine allowing for fully automated punching of book blocks and less manual product handling.

The DBW 360/ KL 500 – An automatic cover turner linked to the already popular high-speed binding lines, the AB 500 HS and ABL 500. Its unique automatic feature of flipping the back cover over after the binding process is complete and spinning every second book 180 degrees for easy stacking and packaging means minimal manual product handling; something which many of our customers are excited about. These new introductions to the already successful Renz portfolio are aimed at addressing new pressures on printers, such as the print-on-demand market and calls for increased automation or inline systems and further demonstrate Renz’s ability to continually adapt to market demands.

A major highlight for Renz was selling one high speed Autopunch (AP 360) per day at the show. Dermot Callaghan – Renz UK Bindery Products Sales Manager said “This machine, a leader in its field, reduces punching bottle necks. With just one operator needed it is capable of comfortably punching in excess of 60,000 sheets per hour”.

Daniel Pooley – Renz UK Sales & Marketing Manager said of IPEX 2010 “This has been like no other recent show we have been part of; with customers having new found confidence to invest. In past years customers have been more reluctant to spend, preferring to wait for new products rather than investing heavily in technology already on the market. We feel that with the launch of our new range, together with renewed confidence in the market our customers are more than willing to begin investing again”.

Iain Bullock, Renz UK Managing Director, said “IPEX 2010 has exceeded all of our expectations. It has lived up to its reputation of being a selling show, with Renz taking £100k worth of new orders in the first three days alone. There was a hugely positive air throughout and less negativity and cautiousness than we have experienced from customers in recent years”.

Renz were also ecstatic about the number of demonstrations and sales of their hugely successful bench top semi automatic punching machine (DTP 340 A) and semi automatic binding machines (ECL 360 / WP 300). These machines were designed to specifically bridge the gap between full automation and traditional foot pedal punching and binding systems and it is testament to Renz’s innovation that even with the introduction of newer, more automated machines, these machines still remain hugely popular with customers.

Daniel Pooley added “An investment of only £10.5k gives customers the ability to test the market or take on larger run lengths, before making a bigger investment into fully automated systems.”

IPEX 2010 demonstrates that the motto “Innovate through Technology” is engrained in the fibres of Renz. From adaptable, high speed machines to zero waste and biodegradable consumables, Renz keep pushing the boundaries, to ensure they remain leaders in their field. RENZ exhibited in hall 20 stand C-669. RENZ hall plan as PDF for download
more..

Punching : TC 20

Reliable, desktop, hand thumb cut calendar punch machine producing a 20 mm thumb cut.
more..

Punching : Punch 500

Heavy-duty, professional punch machine. Very versatile machine for all types of book and calendar punching production up to 500 mm in width.
more..

RENZ RING WIRE® : eco 360 comfort

2:1 pitch electric punching and manual binding machine designed for regular use in a small to medium sized office. It takes the manual labour out of punching.
more..

Coil & Spiral : Metal spirals

Come in a range of sizes, colours and pitches.
more..

Laminating : Laminating pouches

High quality RENZ lamination pouches manufactured from the highest quality polyester materials. These pouches will give any image a deep and vibrant colour whilst protecting your documents. They are available in a range of formats with rounded corners.
more..

Punching : ProPunch 36 - 110/150

Heavy-duty, high-speed, professional, automatic, floor standing auto-punch machine. For a range of book and calendar punching production up to 360 mm in width.
more..

Punching : Punch 700

Wide format, heavy-duty, professional, floor standing punch machine. A very versatile machine for all types of book and calendar punching production up to 700 mm in width.
more..

Accessories : Self adhesive pouches

High quality self adhesive pouches in a range of formats.
more..

RENZ RING WIRE® : ECL 360

Electric RENZ RING WIRE® closing machines, no effort required. A user-friendly solution to wire bind all your products quickly and easily, up to 360 mm in width.
more..

RENZ RING WIRE® : Autobind 500

Industrial, high-speed, semi-automatic production RENZ RING WIRE® binding machine for books, calendars and skip binding up to 500 mm in width.
more..

RENZ RING WIRE® : ABL 500

Industrial, high-speed, fully-automatic production RENZ RING WIRE® binding line for books, calendars and skip binding up to 500 mm in width.
more..

RENZ RING WIRE® : WBS 360

Standalone wire manual closing machine for closing RENZ RING WIRE®  elements from ø 5,5 mm - 38 mm (3/16" - 1 1/2") independent of pitch, up to 360 mm in width .
more..

Plastic Comb : Private bind

Entry-level desktop plastic comb punching and binding machine. For low volume home use.
more..

Plastic Comb : PBS 340

PBS 340 is a standalone plastic comb manual closing machine for closing of plastic comb elements from ø 6 to 52 mm (1/4" - 2")
more..

RENZ RING WIRE® : RW 360

3:1 pitch entry-level office manual punching and binding machine designed for regular use in a small to medium sized office.
more..

Laminating : ID clip

Metal ID clip with plastic strap
more..

Laminating : ID clip punch

For punching the ID clip hole.
more..

Coil & Spiral : SC-pliers

Allows you to perfectly cut and crimp wire (spirals) and plastic (coils).
more..

Laminating : Laminating rolls

High quality RENZ lamination films manufactured from the highest quality polyester materials. These films will give any image a deep and vibrant colour whilst protecting your documents.
more..

RENZ RING WIRE® : ERW

3:1 Heavy-duty, fixed pitch, electric desktop punching and RENZ RING WIRE® binding machines for all kinds of book and calendar production. Designed for the production of high volumes of documents of all sizes quickly and easily.
more..

Coil & Spiral : SPB 360

Manual punching and electric inserting machine with manual crimping and cutting. Designed for regular use in a small to medium sized office.
more..

Laminating : HT 330 L

Entry-level laminator suitable for both office and home use, with 2 heated rollers.
more..

Coil & Spiral : CBS 340

Electric spiral inserting machine with integrated manual cutting and crimping unit.
more..

Accessories : Front covers

High quality front covers in a range of colours and formats.
more..

Accessories : Back covers

High quality card back covers in a range of colours and formats.
more..

RENZ RING WIRE® : Calendar hanger

Loose hangers are available - Form 2 - Euro hanger - Straight (RENZ KAS system)
more..

Plastic Comb : Plastic combs

High quality plastic combs to fit all plastic binding machines.
more..

Punching : Punching dies Punch 500/ ES / HD


more..

Punching : Punching dies Punch 700


more..

Punching : Punching dies Autopunch 360


more..

RENZ RING WIRE® : MBS Holding Device

MBS Holding Device for all MBS standalone binding modules: WBS 360, PBS 340 and CBS 340.
more..

Punching : Punching dies ProPunch 36


more..

Accessories : Filing strips

High quality document filing strips in a range pitches and formats.
more..

Punching : AP 360 manual

Heavy-duty, high-speed, professional, automatic, floor standing, auto-punch machine. For a range of book and calendar punching production up to 360 mm in width.
more..

Coil & Spiral : Plastic coils

Come in a range of sizes, colours and pitches and are virtually indestructible.
more..

Punching : AP 360-120 DIGI BL-BL

Heavy-duty, high-speed, professional, automatic, floor standing auto-punch machine. For a range of book and calendar punching production. Built-in offset collection station for the punched product up to 360 mm in width.
more..

RENZ RING WIRE® : MOBI 360

User friendly, flexible, semi-automatic RENZ RING WIRE® binding machine for books, calendars and skip binding, up to 360 mm in width.
more..

RENZ RING WIRE® : RW home

3:1 entry-level desktop home range for punching and RENZ RING WIRE® binding. For use with low volumes of books at home.
more..

RENZ RING WIRE® : Elements

RENZ RING WIRE® Wire Comb Cut Elements in 3:1 and 2:1
more..

RENZ RING WIRE® : Spools

RENZ RING WIRE® binding spools in 3:1 and 2:1.
more..

Coil & Spiral : APSI 300 compact

Automatic coil inserting machine aimed for the digital print market. Inserts pre-cut lengths of coil into the pre-punched book blocks. For all types of plastic coil book production.
more..

Plastic Comb : combinette

Entry-level office manual punching and binding machine designed for regular use in a small to medium sized office.
more..

Punching : AP 360 digital

Heavy-duty, high-speed, professional, automatic, floor standing, auto-punch machine. For a range of book and calendar punching production up to 360 mm in width.
more..

Punching : ProPunch 50 - 110/150

Heavy-duty, high-speed, professional, automatic, floor standing auto-punch machine. For a range of book and calendar punching production up to 500 mm in width.
more..

RENZ RING WIRE® : XL spools

Increase productivity with the ability to have longer runs with less spool changeovers.
more..

RENZ RING WIRE® : SRW 360

3:1 pitch manual punching and binding machine designed for regular use in a small to medium sized office.
more..

RENZ RING WIRE® : SRW 360 comfort

3:1 pitch electric punching and manual binding machine designed for regular use in a small to medium sized office. It takes the manual labour out of punching.
more..

RENZ RING WIRE® : eco S 360

2:1 pitch manual punching and binding machine designed for regular use in a small to medium sized office.
more..

RENZ RING WIRE® : eco C 360

2:1 pitch entry-level office manual punching and binding machine designed for regular use in a small to medium sized office.
more..

RENZ RING WIRE® : eco E

2:1 heavy-duty, fixed pitch, electric desktop punching and RENZ RING WIRE® binding machines for all kinds of book and calendar production. Designed for the production of high volumes of documents of all sizes quickly and easily.
more..

RENZ RING WIRE® : MOBI 500

User friendly, flexible, semi-automatic RENZ RING WIRE® binding machine for books, calendars and skip binding, up to 500 mm in width.
more..

RENZ RING WIRE® : Autobind 700

Industrial, high-speed, semi-automatic production RENZ RING WIRE® binding machine for books, calendars and skip binding up to 700 mm in width.
more..

RENZ RING WIRE® : Autobind 500 HS

Industrial, high-speed, semi-automatic production RENZ RING WIRE® binding machine for books, calendars and skip binding up to 500 mm in width.
more..

RENZ RING WIRE® : Inline 500

Industrial, high-speed, fully-automatic punching and RENZ RING WIRE® binding line for books, calendars and skip binding up to 500 mm in width.
more..

Plastic Comb : combi S

Manual punching and binding machine designed for regular use in a small to medium sized office.
more..

Plastic Comb : combi comfort

Electric punching and manual binding machine designed for regular use in a small to medium sized office. It takes the manual labour out of punching.
more..

Plastic Comb : combi E

Electric heavy-duty and high speed punching and manual binding machine. Designed for the production of high volumes of documents of all sizes quickly and easily.
more..

Coil & Spiral : SPB 360 comfort

Electric punching and electric inserting machine with manual crimping and cutting. Designed for regular use in a small to medium sized office.
more..

Coil & Spiral : APSI 300

Automatic coil inserting machine. Inserts pre-cut lengths of coil into the pre-punched book blocks. For all types of plastic coil book production.
more..

Coil & Spiral : 42 SE

Automatic wire spiral inserting machine. Forms and inserts lengths of spirals into the pre-punched book blocks. For all types of metal spiral book production.
more..

Laminating : HT 330 Dual

Mid-level laminator particularly suited to office use, with 2 heated rollers and 2 hot plates.
more..

Laminating : HT 330 P

Heavy-duty laminator suitable for use in the office as well as the print room, with 4 heated rollers for guaranteed best results.
more..

RENZ RING WIRE® : WP 300

The RENZ WP 300 combined with RENZ WIRE PACK® increases the working efficiency, saves time and guarantees higher productivity when binding, up to 300 mm in width.
more..

Punching : Punching dies ProPunch 50


more..

RENZ RING WIRE® : Starter Kits

Assortment of binding covers and wires to get you started with your Renz binding machine.
more..

RENZ RING WIRE® : Calendar Kit

The calendar kit contains an SRW 360 and TC 20. The 3:1 manual punching and binding machine is designed for low volume regular use.
more..

Punching : Punch 500 HD

Heavy-duty, professional punch machine with built in micro switch and stand. Very versatile machine for all types of book and calendar punching production up to 500 mm in width.
more..

Punching : Punch 500 ES

Heavy-duty, professional punch machine with built in micro switch. Very versatile machine for all types of book and calendar punching production up to 500 mm in width.
more..

RENZ RING WIRE® : eco home

2:1 pitch entry-level desktop home range for punching and RENZ RING WIRE® binding. For use with low volumes of books at home.
more..

RENZ RING WIRE® : ECL 500

Electric RENZ RING WIRE® closing machines, no effort required. A user-friendly solution to wire bind all your products quickly and easily, up to 500 mm in width.
more..

RENZ RING WIRE® : ECL 700

Electric RENZ RING WIRE® closing machines, no effort required. A user-friendly solution to wire bind all your products quickly and easily, up to 700 mm in width.
more..

[19.10.2009] RENZ® launches new website

How do you see it? Mostly, if you want to inform yourself about a product, your first way is to look in the Internet for possible suppliers. The advantages to obtain information in such a way are obvious: it is quick, without any obligation and quite comfortable. RENZ® meet exactly these requirements of their potential and existing customers with their new website: the homepage is designed to give the user quick, current and extensive information. With a very orderly navigation - clearly marked with colour codes for the different product groups - the user is systematically directed to find detailed information on RENZ's large product range. If the visitor of the website is overwhelmed with technical "gobbledygook" of punching, binding and laminating, he/she will find simple explanations in the glossary of the "Help" button. This glossary will be extended in the future and backed by pictures. Moreover, you will now be able to see the faces of your direct partners. If you click the button "Personal contact / Departments" under "Companies", you will find all employees with outward contact listed with their personal data. This enables you to directly contact the person responsible for your specific request. In addition to providing information, RENZ mainly want to improve direct communication and dialogue with this new website. At present, the website is online in English, German and French but will soon be readable also in Spanish and Italian. Moreover, RENZ want to integrate a professional newsletter system so to encourage dialogues between internal and external partner. The future "Marketing-Pool" is mainly intended for daughter companies, world-wide representations and specialized dealers supporting them in their daily advertisment activities. Any feedback and suggestions for improvements are most welcome!
more..

[04.01.2010] Happy New Year !

What we wish you is: Don’t forget to smile.
Because: A smile is free and brings a big return.
It enriches the receptor without making the giver poorer.
Nobody is rich enough that he could abstain from it.
And nobody is that poor that he couldn’t afford it. It means recovering for the tired,
encouragement for the discouraged,
cheer up for the sad
and it is the best remedy against anger. - Excerpt from the advertisement of a New York’s warehouse
during Christmas time -

more..

[26.02.2010] Journeyman’s examination successfully passed!

On February 4th, 2010 the apprentices Christian Kemmer, Christian Hackauf und Peter Nagel successfully finished their apprenticeship with the journeyman’s examination.  All three have been with Renz since 2006. Christian Kemmer completed an apprenticeship as industrial mechanic and is quitting of his own choice. Christian Hackauf from Essingen and Peter Nagel from Waldstetten were trained as mechanotricians. Both are now employed full time at RENZ®. They work in the assembling and electrical installation department for machines of the Professional Line. We congratulate the journeymen to the passed exam!
more..

[20.04.2010] Novelties on IPEX

Renz has addressed new pressures in the finishing sector from the print-on-demand market with faster, more automated equipment. These new machines are designed to meet the needs of clients who use both professional and desktop solutions for small / medium and large print runs. New DSP 360 FA
Fully automatic modular desktop high speed punch a worlds first with an output of up to 40,000 punched sheets per hour. Ability to handle mixed stock including tabs, polyprop covers etc. Modular die insertion allows any loose leaf punch pattern to be punched. This machine bridges the gap between fully automated floor standing systems and heavy duty bench top punches.

New AP 360 Block to Block
High speed floor standing auto punching system, where book blocks are dropped on to the infeed (conveyor), punched and re collated ready for binding. Allows for less product handling and full automation of punching and binding a worlds first. This system can be linked to an automatic binding line i.e. Renz ABL 500
New DBW / KL 500
New automatic cover turner linked to the AB 500 HS / ABL 500, this device automatically flips the back cover after the binding process and also spins every second book 180 degrees for easy stacking. It can also be linked to shrink wrap tunnels or other boxing equipment. Great time saver aimed at high volume or fast production environments. Daniel Pooley - Sales & Marketing Manager comments ‘Renz are proud to be leading the way in binding innovations with continual improvements to their binding technologies demonstrating their ability to react to customer demands’. Iain Bullock Renz Managing Director comments ‘IPEX this time round is one of the most important UK shows in the last twenty years, both in terms of the “digital and associated technologies race” but also (and even more importantly) in terms of deciding future business strategy.’ Show highlights, what Renz will be producing:
Using the latest Renz punching and binding machines we will be producing wire bound books, tent cards and calendars in both short and long run work demonstrating the key features of our product range for the digital printer, printer, print finisher, professional bindery, inplant, copy shop and bind on demand market. Why in-house punching & binding makes sense?

  • Gives printer full control of end to end process allowing them to better service customer requirements.
  • Allows full control over price and delivery of each job with no outsourcing costs.
  • Guarantees the quality of work.
Wire binding is increasingly becoming one of the most popular options for finishing documents such as books and presentations which in the past were traditionally perfect bound (using glue) or stitched; but are now being wire bound so they can be opened 360 degrees without impacting on the documents’ strength. Loose leaf finishing is versatile, from calendar work through to book binding which allows the printer to fill their press all year round. About Renz Company Background / History:
From humble beginnings starting life as a blacksmith shop in Stuttgart, Germany back in 1908, the Renz group has now grown considerably; expanding internationally with subsidiaries in 12 countries worldwide. Renz are now one of the world’s largest providers of punching & binding systems and continually striving to produce innovative solutions. Renz boasts the biggest range of punching and binding options and will be pleased to demonstrate them to you.

Wire Comb Binding
Spiral Binding
Plastic Comb Binding
Punching & Perforating
Laminating Systems
Accessories

For further information / high resolution pictures, please contact me or come and visit me on the stand in Hall 20 Stand C 669
Daniel Pooley  mobile 07834 193615  email. danielpooley@renz.co.uk
more..

[06.04.2010] Marketing Director retires

Having accumulated 26 years of experience, Bruno Staib - Marketing Director for Chr. Renz GmbH in Heubach, Southern Germany - will retire as of 1st April 2010. In Mr. Staib, RENZ will lose one of the original cornerstones of the company. The work that he has done during his 26 years has significantly helped to shape the company. In 1982 he first worked for several months in the field for the former chief agency of RENZ in Colombia. As from 1983 he supported the field service of RENZ Germany. In 1986 he took on the position of Domestic Sales Manager. However, increasingly his time was occupied coordinating marketing activities like merchandising, advertising and exhibition preparation. As a result of this Mr. Staib, who is now 63 years old, was given the position of Marketing Director in November 1989. In this position he has become known to many people in the paper, office and graphic industry as a "wily fair fox" and has been ever present at all RENZ exhibitions for many, many years. Over the last few years he has led a particularly successful rework of the RENZ Corporate Design as well as overseeing the recent website relaunch. Mr. Staib will be sorely missed by all of his colleagues at RENZ and by the many industry friends that he has made over the years. His duties and responsibilities will be redistributed internally.
more..

[22.03.2010] RENZ® unterstützt Junior Unternehmen RSG Style Attack

[Translate to English:] Das Unternehmen RSG Style Attack bietet individuelle Drucke für T-Shirts an, die an die Wünsche der Kunden angepasst sind. Alle Menschen, die schnell und günstig T-Shirts bedrucken lassen wollen, sind angesprochen. Vor allem Schulen, Firmen und Vereine. Durch eine Homepage und Flyer wird der Service publik gemacht, da so die größte Menge Menschen erreicht werden kann. Der geplante Beginn des Vorhabens wird gegen Ende Dezember erfolgen. Das Startkapital von 900 Euro des Unternehmens wird aus Fremd- und Eigenfinanzierung geschöpft. Das Heubacher Unternehmen Chr. Renz GmbH tritt als Werbepartner auf. Die Geschäftsidee basiert darauf, dem Kunden einen individuellen T-Shirt Druck anzubieten, an dessen Gestaltung er selbst mitwirkt, indem er RSG Style Attack seine Ideen und Vorstellungen mitteilt. Das Unternehmen entwirft das Design für den Druck. Ziel ist es, kostengünstig zu produzieren und es Leuten zu erleichtern an individuelle T-Shirts zu gelangen ohne großen Zeitaufwand zu betreiben. Zum Zeitpunkt der Unternehmensauflösung soll es möglich sein den Anteilseignern mehr Geld auszuzahlen als sie investiert haben. Außerdem wollen die Schüler Erfahrungen in ihrem Unternehmen sammeln, die für deren Zukunft nützlich sein werden. http://www.rsg-styleattack.de/
more..

[15.06.2010] Fair impressions of IPEX 2010 in Birmingham!

Please click here to see some of our nicest pictures of our fair participation.
more..

[08.07.2010] Successful trade show appearance at ExpoPrint in São Paulo

From 23rd to 29th June 2010 Renz do Brasil, a subsidiary of Chr. Renz GmbH, participated at the fair ExpoPrint in São Paulo, Brazil.
This exhibition is the greatest trade fair of the printing industry in South America.
RENZ could not only welcome lots of Brazilian visitors but also qualified decision-makers from all over South and Central America.

An important point were punching and binding machines for paper processing in the digital printing sector: The Mobi 500, a semi automatic wire comb binding machine, and the Autopunch 360, an automatic high-performance punching machine were of particular interest.
Furthermore the Autobind 500 HS had its world premiere in South America. This semi automatic binding machine shows an increase in performance of up to 30 percent compared to the conventional Autbind 500, due to its automatic product ejection.

Paper converting with plastic spirals was a further focus at the RENZ booth. For the first time a former with feeding unit was presented. This system is a semi automatic high-performance plastic spiral winding machine.
The market for this binding technique becomes more and more important in South America. With the former paper processors have the opportunity for the first time to improve from manual to semi automatic production.

Also for the first time at a Brazilian fair visitors of the RENZ booth could have a look at the new HT pouch laminators of the product category “office line”. These products were also very well received which was reflected in numerous fair orders.
Mario Hinrichsen, managing director of Renz do Brasil, summarizes positively: “ExpoPrint 2010 showed the general euphoric atmosphere that is currently noticeable in the Brazilian and South American market. Since the foundation eight years before Renz do Brasil has been ingrained deeply in the market and has become a reliable partner for the graphic printing industry.”



more..

[05.08.2010] New, space saving packing „face to face“ for RENZ RING WIRE® cut binding elements

Wire comb binding is a product that needs an optimum packing to assure a failure-free binding.
With the patented WIRE PACK® system RENZ deliver binding elements in most diameters on an absolutely transport safe packing since the single RENZ RING WIRE® cut elements are fixed on a cardboard medium. Thus, the cut binding elements do not get stuck and deformed by pulling them apart again. 
Until now the Wirepacks were stacked on top of each other so that the side where the wire comb is fixed was faced upwards. 
Now RENZ developed the WIRE PACK® system further. With the new “face to face” packing technique the binding elements on the card board are stacked opposite to each other in the packing box. Thereby packing volume is reduced by up to 45 percent. 

You as our customer benefit from this! Through the smaller packing your storage space will be reduced and when ordering larger quantities you save transportation costs.
more..

[27.08.2010] Photokina successfully closed.

Renz presented their products around punching binding and laminating of photo products in hall 4.1 stand I041. Renz was the right address for digital printers, who also wanted to produce wire comb bound calendars or photo books.


more..

[28.09.2010] Initiative Standort Deutschland mit neuer Website und Webshop

Diese Initiative ist eine Arbeitsgemeinschaft von mittelständischen Unternehmen aus der PBS-Branche (Papier, Büro und Schreibwaren).

Die Firmen, die der Initiative Standort Deutschland angehören, streben gemeinsam an, in Deutschland Arbeitsplätze zu erhalten, Ausbildungsplätze zu schaffen, in Deutschland zu investieren und Steuern zu zahlen. Dies alles geschieht vor dem Hintergrund, als Mittelständler deutsche Qualitätsprodukte zu produzieren und zu vermarkten.

Sie setzt sich aus folgenden Unternehmen zusammen:
HAN, IDEAL, MAUL, RENZ, sigel, VELOFLEX.

Nun können ausgewählte RENZ-Produkte über diese Website auch online bestellt werden!

Auch auf www.renz.com wird es in einigen Monaten eine Online-Bestellmöglichkeit auf bestimmten Produktseiten geben.


more..

[15.10.2010] RENZ auf den Steuber Infotagen 2010!

Wir sind im Herbst auf den Steuber Infotagen in Mönchengladbach und zeigen Ihnen die halbautomatische Bindemaschine Mobi 500.

Besuchen Sie uns und sichern Sie sich Ihr persönliches Exemplar eines Geburtstagskalenders oder eines Schreibblocks – natürlich gebunden mit RENZ RING WIRE®!

Mehr zum Programm finden Sie in Ihrer Einladung auf der Steuber-Website.
more..

[15.11.2010] Nightly fire from November 1st solved !

The criminal investigation department was able to quickly solve the arson from November 1st when several pallets standing on the loading dock inflamed. Fortunately nobody was injured but there is property damages in the six-figure range. Two young men from Heubach, aged 16 and 18 made a confession. Juvenile cockiness might have been the cause for the fire. The youngsters only wanted to see wheter the material would be combustible. When they realized that it inflamed very quickly they tried to extinct the fire, unfortunaltey without success, so that they finally alerted the fire briagde themselves. The production was started with the beginning of the first shift on Tuesday morning and all departments work as usual. Fortunately we have had no delays in sending out merchandize to our customers.

more..

[22.12.2010] Availability during holiday season

We at RENZ also take the advantage of the holiday season to spend time with our families.

If you require our commercial service during the working days from 27th December 2010 to 7th January 2011, please call the following telephone number: +49 7173 186-32.
Our technical service is available under the phone number +49 7173 186-74 or -23.

Please also consider that 24th and 31th December as well as 6th January are holidays in our region here in Germany.
As from 10th January 2011, you can reach us as usual.

We wish you happy holidays!
Your team at RENZ


more..

[08.12.2010] Lösung des Sudoku-Rätsels



In diesen Tagen müssten unsere Kunden ihn in den Händen halten: den druckfrischen Dreimonatskalender von RENZ, den wir traditionell zur Adventszeit verschicken.

Mit ihm haben wir auch unseren "Weihnachtsbrief" verschickt, in dem wir unseren Kunden für die gute und erfolgreiche Zusammenarbeit im vergangenen Jahr danken.

In diesem Brief haben wir unsere neun guten Wünsche an Sie fürs Jahr 2011 in einem Sudoku-Rätsel verpackt.

Wir sind uns sicher, Sie haben das Sudoku gelöst. Falls Sie aber doch "spicken" wollen, wie das fertige Sudoku aussieht, finden Sie in der Grafik des Rätsels Lösung.
more..

[14.12.2010] RENZ in Spanish

Right before Christmas we’ve done it: as of now all information at our website is also available in Spanish. We wish our Spanish speaking visitors fun browsing through our website!
more..

[20.12.2010] Zahlreiche Jubilare für lange Betriebszugehörigkeit geehrt

Vergangene Woche konnte die Chr. Renz GmbH im Rahmen der Weihnachtsfeier über 20 Mitarbeiter für jahrzehntelange Betriebszugehörigkeit ehren. Der Geschäftsführer Peter Renz hob in seiner Ansprache hervor, wie wichtig dabei jeder einzelne Mitarbeiter für das Unternehmen ist und wie jeder seinen täglichen Beitrag zum Unternehmenserfolg leistet. Für 30 Jahre wurden Michael Young und Markus Gröner geehrt. Bereits 25 Jahre bei RENZ arbeiten Ulrike Waibel, Walter Konrad und Uwe Fischer. Auf 20 Jahre Betriebszugehörigkeit blicken Sonja Kühnhöfer, Wanda Machowska, Vesna Bojevac und Siegfried Gößele zurück. Zehn Jahre im Unternehmen sind Thomas Stadler, Ralf Bönsel, Ingo Brenner, Viktor Klöpfer, Petra Rost, Maria Platzer, Lothar Freimann, Albert Wildau, Nicole Ockert, Tobias Bretzler, Martina Hofmann und Mike Drometer.


more..

[20.01.2011] Paperworld fair in Frankfurt ended successfully!

For RENZ, the Paperworld fair in Frankfurt ended very successfully!
In hall 3.0 C20 interesting solutions for punching, binding and laminating have been presented.

In the main focus of the booth was the automatic punching machine RENZ Autopunch 360-120 Digital Block-Block. Its specialty are the paper feeder and delivery which are unique in the graphic industry. The products that need to be punched are fed separatly. After the punching process they are also delivered separately and are placed offset on a deep pile delivery.
Thus, the products are ideally prepared for the following binding process because you are able to take the single blocks easily off the pile without need to separate them.
Due to the integrated QSA technology (Quick Size Adjustment) format adjustments can be done easily and without long setup times. Different presaved formats can be retrieved via touch screen. 

A further innovation were „Covers by Renz“. This extension of the accessory line continues covers for books and brochures that can be designed, customized with variable letterings and ordered by the customer online. You can choose between different formats and versions, e.g. hard cover, soft cover and wrap around cover. "Covers by Renz" are presumably available as of second quarter 2011.


more..

[21.01.2011] Grafische Vakbeurs in NL-Gorinchem

During the Grafische Vakbeurs in NL-Gorinchem RENZ showed solutions around punching and binding at booth No. 141. In the main focus were solutions for professional paper converters. But machines for smaller and medium runs have also been exhibited as well. 

Would you like to catch up on our solutions? Please write an e-mail to Ms Petra Hökel (schwed@renz-germany.de).
more..

[10.02.2011] Novelty of RENZ at Hunkeler Innovationdays in Lucerne (Switzerland)

RENZ exhibited their new AP 360-120 DIGI BL-BL at Hunkeler Innovationdays in Luzern (14th to 17th February 2011).

The machine is a fully modular high speed automatic book block punch system for working widths of up to 360 mm.
The machine is an evolution form the leading AP 360 high speed punch to meet and match the pace of the front end digital printers.
This brand new concept from Renz, aims to fill the gap between high speed punching systems and fully automated lines. The machine has evolved to meet the demands of the digital and offset market, the continued growth in punching and wire binding book stocks means major bottle necks, hence the AP 360 – 120 block to block was born.

Please use this link to get more information on the AP 360-120 DIGI BL-BL.
more..

[14.02.2011] New International Marketing Manager at RENZ

We are delighted to announce that Daniel Pooley has recently been promoted to International Marketing Manager for Renz GmbH. Daniel has worked for Renz UK for eleven years, most recently in the capacity of Sales & Marketing Manager. In his new international role Daniel will report to Michael Schubert Chief Sales & Marketing Officer (CSO), Renz Group and will be based between the UK & Germany.

In his new role Daniel will be responsible for the development and implementation of the global international marketing strategy for the entire Renz group.

"Since Daniel joined Renz 11 years ago, I have watched him develop and grow to become an effective Sales and Marketing Manager, highly valued within the Renz group” commented Iain Bullock, Managing Director, Renz UK. "When we were discussing the appointment of a new head of International Marketing for the group, I had no hesitation in fully supporting the decision to promote Daniel from within the group. Having already proven himself in this area through development and implementation of successful marketing campaigns for the UK; Daniel has helped to build Renz UK into a recognised industry leader in the loose-leaf punching and binding field."

"It is great to be able to draw on such international expertise from within the group,” commented Michael Schubert CSO, Renz Group. “What Daniel has achieved; especially in the "Office-field” is exceptional and although it will be hard to find someone of his calibre to replace him within Renz UK, I am confident that he relishes the challenge of recruiting and training his successor. Knowing Daniel, I wouldn't expect anything less. Daniel is a huge asset to the company and is already very well respected by his peers. His accomplishments, creativity, energy and passion for the industry speak for themselves and make him the perfect candidate for this role. I look forward to working with Daniel more closely and see 2011 as an exciting time for the company with new machine developments which I anticipate will help to further strengthen our global market position."




more..

[03.03.2011] RENZ at Digimedia




more..

[02.03.2011] Obituary

On 11th February 2011, our esteemed employee and colleague Ad Kers sadly passed away.  At only 57 years old he lost his battle against a serious disease.

Mr. Kers started as our Sales Manager for the Netherlands in 2001. His expertise contributed to building up RENZ in the Netherlands. He was also co-organizer of the annual Grafische Vakbeurs in Gorinchem. We owe Mr. Kers very much. His death is a grievous loss to us all. We express our deepest sympathy to the family of Ad Kers. We will retain fond memories of him.
more..

[20.04.2011] New area sales manager in the Netherlands


more..

[03.05.2011] Renz UK at Northprint

Throughout the 3 days of Northprint Renz will be proudly showing and demonstrating a whole selection of products. Whether it’s entry level punching and binding or full inline systems we have the answer. We will be introducing to the UK market 2 new exciting products… New MOBI 360: Automatic wire closing machine, wire sizes ¼ - 1¼.
Ideal for short and long run work.
Ability to do calendar work.
Very quick changeover time.
1 set of closing bars for all sizes.
Touch pad make ready. New APSI 300 compact: Automated insertion of plastic coil with the APSI 300 compact. The machine has a quick, easy make ready and offers high speed book production. The machine can also be fully automated forming the coil first to then be fed automatically into the book. We look forward to seeing you at Northprint 2011, May 10th - 12th Hall A - Stand 256. If you would like to pre book an appointment, please feel free to contact us on 01707 270001 ask for Dermot or Paul.
more..

[22.05.2011] Renz France at Graphitec

Come and visit us on our booth 4 D 58.
more..

[17.11.2011] RENZ wins innovation award

For eight years the German printing industry has awarded companies for innovative products. The PrintStars 2011 event took place in Stuttgart on 10th November 2011. The patron of this innovation award was Federal Minister of Economics and Technology, Dr. Philipp Roesler.

World market leader Renz participated with the RENZ AP 360-120 DIGI BL-BL. This multifunctional punching system results from an intensive dialogue with the calendar industry.

Renz won the silver award in the category “finishing technology”. Peter Renz, CEO of the Renz group, received the award in the concert and congress center Stuttgarter Liederhalle. Peter Renz proudly and happily reported on the stage: “With this system we have created a unique product. We are on the right track!” 

The jury was impressed by the 60 %  
increased productivity compared to existing production systems for calendar punching. Another special feature is the intelligent de-stacking system, which – for the first time ever – achieves a staggered product delivery, which is ideal for personalized calendars.

Many prestigious companies have been awarded, e.g:. the Audi AG, Ingolstadt for the Audi magazine “Dialoge” and Kodak has been awarded in the technology sector. --- Picture: Awards ceremony From the right: Mr. Niemela from Deutscher Drucker, Manfred Vogler, Michael Schubert and Peter Renz from Chr. Renz GmbH.  


more..

[22.12.2011] Availability during holiday season

If you require our commercial service during the working days from 
27th December 2011 to 5th January 2012
, please call the following
phone number: +49 7173 186-81.

Our technical service is available under the phone number +49 7173 186-23

Please also consider that 24th and 31st December as well as 6th January are holidays in our region here in Germany. 
As from 9th January 2012, you can reach us as usual. 

We wish you happy holidays!
Your team at RENZ


more..

[09.01.2012] Paperworld 2012


more..

[23.01.2012] Grafische Vakbeurs & Vakbeurs Sign 2012


more..

[23.02.2012] Istanbul Stationery Fair

We would like to welcome all our visitors to pre register at:

http://www.ite-turkey.com/ver3/fairs/kirtasiye_en/ please click the link and use "Online Invitation Form"
more..

[01.06.2012] Drupa 2012 exceeds Renz expectations

Click here for more DRUPA 2012 pictures!

Leading punching and loose leaf binding manufacturer Renz, has said its post drupa 2012 order intake is 50% up on the previous drupa 2008. Helped by the highly successful launch of two new punching and binding systems at this year’s exhibition, the new Renz machines creating this buzz at drupa were the Inline 360 and P 360 A:

The revolutionary Inline 360 is a high speed punching and binding system, where book blocks are dropped on to the infeed (conveyor), punched, re collated and fed automatically into the binder. Allows for less product handling and full automation of punching and binding, a world first. The Inline is also capable of punching and binding calendar sets with either nail hole or calendar thumb cut. Once the DBW automatic cover turner is linked to the line it allows the device to automatically flip the back cover after the binding process and also spins every second book 180 degrees for level stacking. It can also be linked to shrink wrap tunnels or other boxing equipment. Great time saver aimed at high volume or fast production environments.

The P 360 A is a fully automatic modular high speed punch, with an output of up to 72,000 punched sheets per hour. It has the ability to handle mixed stock including polyprop covers. Modular die insertion allows any loose leaf punch pattern to be punched. This machine bridges the gap between fully automated floor standing systems and heavy duty bench top punches. Complementing the recently launched Renz wire binding machine the Mobi 360 for the book, photobook and calendar work.

These new introductions to the already successful Renz portfolio are aimed at addressing new pressures on printers, such as the print-on-demand market and calls for increased automation or inline systems and further demonstrate Renz’s ability to continually adapt to market demands.

Major highlights for Renz were the sales of several fully automatic high speed punching and binding lines the Renz Inline 500. Michael Schubert – Renz Group CSO said “This machine, a leader in its field, reduces punching and binding bottle necks. With just one operator needed it is capable of comfortably punching and binding in excess of 1,700 bound products per hour”.

Daniel Pooley – Renz International Marketing Manager said of DRUPA 2012 “In past years customers have been more reluctant to spend, preferring to wait for new products rather than 

more..

[23.11.2012] Scheckübergabe an den Förderverein Heubach

Wir berichteten schon über die gemeinsame Aktion der Chr. Renz GmbH und des Heubacher Druckservice auf den Heubacher Regionaltagen. Die beiden Firmen fertigten Kalender zugunsten des Fördervereins Heubach. Die Raiffeisenbank Rosenstein stockte den Erlös des Kalenderverkaufs auf EUR 250,- auf.

Die Scheckübergabe machte den Beteiligten großen Spaß, da sich die Kinder sichtlich freuten.

Michael Schubert, der neue geschäftsführende Gesellschafter der Chr. Renz GmbH: „Die Unterstützung regionaler Projekte liegt uns sehr am Herzen. Wir danken unseren Partnern für das gemeinsame Engagement.“

Foto:

Von rechts oben: Matthias Hillenbrand von der Raiffeisenbank Rosenstein, Maxi Renz von der Chr. Renz GmbH, Ralph Obser vom Heubacher Druckservice und die Kinder vom Kinderhaus „Auhölzle“ bei der Scheckübergabe.



more..

[23.11.2012] Management change at Chr. RENZ GmbH

After 34 years there has been a change in the top management at RENZ in Heubach. RENZ is one of the leading producers and distributers of binding and laminating systems. The RENZ group is internationally represented with nine subsidiaries and employees over 350 people worldwide. The owner Peter Renz (67) resigned from his position as CEO, due to his age. He now has a role on the recently initiated advisory board of Chr. RENZ GmbH. Peter Renz developed this business into a worldwide leading company that now has a legacy of over a 100 years. Michael Schubert (41) has been appointed new managing partner of the RENZ Group. He joined RENZ in 2006 as International Sales Manager. Before that he had different jobs in the capital goods industry and worked for 12 years in the United States and Brazil.
more..

[06.06.2013] Initiative "Proud to be made in Germany" at Paperworld 2013

Six medium-sized family enterprises consciously say "YES" to "Made in Germany". This year all members presented innovative quality products at Paperworld 2013. All six companies were very satisfied with the show and its results.
The initivative was introduced at the Paperworld Forum. Michael Schubert, managing Partner of the RENZ Group (forth from left) with the entry-level machine RENZ private eco.
more..

[06.06.2013] Educational partnership

This cooperation focuses on the human being, the pupil with all his dignity, all his talents and all his creativity. Every human being should find his own way depending on what he intends and on what he is able to do. This can be an academic career as well as with similar significance a handicraft or another apprenticeship. This is a unique project in the region. Cooperation partners are, e.g., ZF-Lenksysteme in Schwäbisch Gmünd, SUSA in Heubach, Stauferklinikum (a hospital) in Mutlangen, Hirschbrauerei (a brewery) in Heubach and Haus Lindenhof (an institution for handicapped). The aim of this cooperation is to help pupils to get information on various professions and to increase the pupils' educational skills. The picture shows the cooperation partners when signing the contracts; Maxi Renz (sitting 4th from left)
more..

[02.10.2013] Thursday, October 3rd, we will celebrate the "Unification Day"

Dear Customers and Partners,  Tomorrow, Thursday, October 3rd, we will celebrate the "Unification Day" here in Germany. Our company will be closed.  On Friday, October 4th, we will be working with a reduced staff.
more..

[07.08.2014] Renz and Epson kit added to Print Efficiently 2014 line up


more..

[16.05.2014] The Renz group from Heubach has new direction

Renz is more than 100 year old, medium-sized family firm with approximately 300 employees, including 160 at its headquarters in Heubach. The firm specialises in the manufacturing of punching, binding and laminating systems and binding supplies for a wide range of applications from the office to the paper processing industry.
 
Managing Director Michael Schubert: "I am delighted that we have found a group of experienced and active investors, with which a successful and sustainable development program is now possible for the group. The significant strength of equity is the basis for the restructuring of the company and opens up further growth potential for the Renz Group ."
 
The outgoing majority shareholder of Renz GmbH, Peter Renz, had retired in 2012 from the operating business and remains in the group as a consultant and an advisory board member. "The investor participation begins a new era for the Renz company and also opens up significant growth opportunities that were unreachable for us to date. I am glad that I was able to lay those foundations for the further successful development of my life's work, “commented Peter Renz.
 
The new shareholders of the Renz group specialize in long-term and active investments in medium-sized companies. The speciality is in particular the background of extensive management experience even where difficult corporate situations were managed and sustainable growth was generated.
 
CEO Georg Saint- Denis brings with him a long standing leadership position from the automotive supply industry with wide experience and modern management tools. “Renz is traditional but innovative company with an international focus offering the opportunity to implement our growth and value enhancement strategy. The aim of developing Renz to becoming the sustained market leader in its sector and industry" said Saint- Denis. "I have been very well received here by the staff  and feel right from the beginning the great support and trust from all team members" Saint- Denis describes as his first impressions.
 
Contact:
Michael Schubert
Chr. Renz GmbH
Rechbergstr. 44, 73540 Heubach
Germany
Tel.: +49 7173 / 18637
schubert@renz-germany.de
www.renz.com
more..

Michael Schubert

RENZ Deutschland Chr. Renz GmbH Rechbergstraße 44 Heubach 73540 mail@renz-germany.de +49 (0)7173 186 37
more..

Georg Saint-Denis

RENZ Deutschland Chr. Renz GmbH Rechbergstraße 44 Heubach 73540 mail@renz-germany.de +49 (0)7173 186 37
more..

Helmut Achauer

RENZ Deutschland Chr. Renz GmbH Rechbergstraße 44 Heubach 73540 achauer@renz-germany.de +49 (0)7173 186 24
more..

Silvia Sawitza

RENZ Deutschland Chr. Renz GmbH Rechbergstraße 44 Heubach 73540 sawitza@renz-germany.de +49 (0)7173 186 66
more..

Jakob Plett

RENZ Deutschland Chr. Renz GmbH Rechbergstraße 44 Heubach 73540 plett@renz-germany.de +49 (0)7173 186 221
more..

Olaf Gerber

RENZ Deutschland Chr. Renz GmbH Rechbergstraße 44 Heubach 73540 gerber@renz-germany.de +49 (0)7173 186 35
more..

Manfred Vogler

RENZ Deutschland Chr. Renz GmbH Rechbergstraße 44 Heubach 73540 vogler@renz-germany.de +49 (0)7173 186 42
more..

Thomas Alter

RENZ Deutschland Chr. Renz GmbH Rechbergstraße 44 Heubach 73540 alter@renz-germany.de +49 (0)7173 186 47
more..

Nicole Ruppert

RENZ Deutschland Chr. Renz GmbH Rechbergstraße 44 Heubach 73540 ruppert@renz-germany.de +49 (0)7173 186 44
more..

Thomas Reinhard

RENZ Deutschland Chr. Renz GmbH Rechbergstraße 44 Heubach 73540 reinhard@renz-germany.de +49 (0)7173 186 52
more..

Raffaele Del Papa

RENZ Deutschland Chr. Renz GmbH Rechbergstraße 44 Heubach 73540 delpapa@renz-germany.de +49 (0)7173 186 81
more..

Ingrid Abele

RENZ Deutschland Chr. Renz GmbH Rechbergstraße 44 Heubach 73540 abele@renz-germany.de +49 (0)7173 186 31
more..

Petra Rost

RENZ Deutschland Chr. Renz GmbH Rechbergstraße 44 Heubach 73540 rost@renz-germany.de +49 (0)7173 186 53
more..

Hilde Baur

RENZ Deutschland Chr. Renz GmbH Rechbergstraße 44 Heubach 73540 baur@renz-germany.de +49 (0)7173 186 143
more..

Alexander Geller

RENZ Deutschland Chr. Renz GmbH Rechbergstraße 44 Heubach 73540 geller@renz-germany.de +49 (0)7173 186 62
more..

Daniel Pooley

RENZ Deutschland Chr. Renz GmbH Rechbergstraße 44 Heubach 73540 pooley@renz-germany.de +49 (0)7173 186 38
more..

Michael Köhler

RENZ Deutschland Chr. Renz GmbH Rechbergstraße 44 Heubach 73540 koehler@renz-germany.de +49 (0)7173 186 23
more..

Gerd Sperl

RENZ Deutschland Chr. Renz GmbH Rechbergstraße 44 Heubach 73540 sperl@renz-germany.de +49 (0)7173 186 54
more..

Ulrich Beck

RENZ Deutschland Chr. Renz GmbH Rechbergstraße 44 Heubach 73540 u.beck@renz-germany.de +49 (0)7173 186 43
more..

Wolfgang Gröner

RENZ Deutschland Chr. Renz GmbH Rechbergstraße 44 Heubach 73540 groener@renz-germany.de +49 (0)7173 186 226
more..

Hans-Jürgen Hofbauer

RENZ Deutschland Chr. Renz GmbH Rechbergstraße 44 Heubach 73540 hofbauer@renz-germany.de +49 (0)7173 186 26
more..

Jochen Heinz

RENZ Deutschland Chr. Renz GmbH Rechbergstraße 44 Heubach 73540 heinz@renz-germany.de +49 (0)7173 186 19
more..

Gabriela Kraus

RENZ Deutschland Chr. Renz GmbH Rechbergstraße 44 Heubach 73540 kraus@renz-germany.de +49 (0)7173 186 61
more..

Rainer Gsell

RENZ Deutschland Chr. Renz GmbH Rechbergstraße 44 Heubach 73540 gsell@renz-germany.de +49 (0)7173 186 33
more..

Maximilian Rottler

RENZ Deutschland Chr. Renz GmbH Rechbergstraße 44 Heubach 73540 m.rottler@renz-germany.de +49 (0)7173 186 142
more..

Daniela Seibold

RENZ Deutschland Chr. Renz GmbH Rechbergstraße 44 Heubach 73540 seibold@renz-germany.de +49 (0)7173 186 71
more..

Björn Mangold

RENZ Deutschland Chr. Renz GmbH Rechbergstraße 44 Heubach 73540 mangold@renz-germany.de +49 (0)7173 186 51
more..

Sabine Vogler

RENZ Deutschland Chr. Renz GmbH Rechbergstraße 44 Heubach 73540 s.vogler@renz-germany.de +49 (0)7173 186 225
more..

Iain Bullock

RENZ UK Ltd. Hatfield Park Estate Hatfield Herts. AL9 5PQ iainbullock@renz.co.uk +44 (0) 1707 282742 Managing Director
more..

Dermot Callaghan

RENZ UK Ltd. Hatfield Park Estate Hatfield Herts. AL9 5PQ dermotcallaghan@renz.co.uk +44 (0) 1707 282748 Professional Bindery Sales Manager
more..

Paul Simpson

RENZ UK Ltd. Hatfield Park Estate Hatfield Herts. AL9 5PQ paulsimpson@renz.co.uk +44 (0) 1707 282745 Office Machine Sales
more..

Razinah Scofield

RENZ UK Ltd. Hatfield Park Estate Hatfield Herts. AL9 5PQ razinahscofield@renz.co.uk +44 (0) 1707 282740 Sales Co-ordinator
more..

Lee Sherburn

RENZ UK Ltd. Hatfield Park Estate Hatfield Herts. AL9 5PQ service@renz.co.uk +44 (0) 1707 282749 Service Manager
more..

Bharti Rughani

RENZ UK Ltd. Hatfield Park Estate Hatfield Herts. AL9 5PQ bhartirughani@renz.co.uk +44 (0) 1707 282743
more..

Paul Cohen

RENZ Australia Pty. Ltd. Unit H, 10-16 South St., Rydalmere NSW 2116 paul.cohen@renz.com.au +61 (0) 2 8893 9493 General Manager
more..

Vishvambhar Patel

RENZ Australia Pty. Ltd. Unit H, 10-16 South St., Rydalmere NSW 2116 vish.patel@renz.com.au +61 (0) 2 8893 9493 Accounting / Administration
more..

Luke Townsend

RENZ Australia Pty. Ltd. Unit H, 10-16 South St., Rydalmere NSW 2116 luke.townsend@renz.com.au +61 (0) 2 8893 9493 National Service Manager
more..

Cemal Uslu

RENZtürk Kirtasiye Imalat San.Tic.Ltd.Sti. Ankara Fabrika: Alinteri Bulvari No:29/A3 Ostim / Ankara 6370 cemaluslu@renzturk.com.tr +90 (0)312 386 13 -11 /-12 General Manager
more..

Cem Uslu

RENZtürk Kirtasiye Imalat San.Tic.Ltd.Sti. Ankara Fabrika: Alinteri Bulvari No:29/A3 Ostim / Ankara 6370 cemuslu@renzturk.com.tr +90 (0)312 386 13 -11/-12 Sales Manager
more..

İstanbul Şube

RENZtürk Kirtasiye Imalat San.Tic.Ltd.Sti. Ankara Fabrika: Alinteri Bulvari No:29/A3 Ostim / Ankara 6370 info@renzturk.com.tr +90 (0)212 438 27 26 C2 Blok 220 No:1 Giyimkent / Esenler - İstanbul
more..

Erik Stieler

RENZ Deutschland Chr. Renz GmbH Rechbergstraße 44 Heubach 73540 stieler@renz-germany.de +49 (0)7173 / 186 85
more..

Sina Tiede

RENZ Deutschland Chr. Renz GmbH Rechbergstraße 44 Heubach 73540 tiede@renz-germany.de +49 (0)7173 186 57
more..