O P E R A T I O N






Step 1
The paper drops vertically into the punching slot. Specially hardened punching stamps will perforate paper pads up to .1" (2.5mm) thick [.08" or 2.0mm for the SRW Comfort] and provide accurate punching results with minimal effort [manual versions]. With electric models, punching is done by pressing the foot pedal.



Step 2
Select the proper wire comb, determined by the number of sheets, and place it under the built-in wire holder. Remove the punched paper from the punch and place it directly onto the open wire comb. The horizontal closing mechanism prevents the pages from slipping out of the comb when closing.

Step 3
Place the assembled book between the closing bars. Then pull the closing lever to close the wire.

Step 4
The finished book.

© 2006 RENZ AMERICA CO., INC